NEPS1000 Accessories: Description & Use
-
In Line Gas Conditioner (1Kg) BLE1100/80
View larger image
This is a pipeline dryer which can be used to dry the nitrogen or gas if the quality is not known or the gas is not dry enough for the application.
-
Dewpoint Function Checker (inc. 5 refills) BLE1100/53
View larger image
This is a portable hand held device that can be used to quickly confirm the dewpoint calibration of the NEPS range.
-
Refills for Dewpoint Function Checker BLE1100/0211
View larger image
These are the desiccant refills for the dewpoint function checker.
-
Inter Connecting Tube ( 2 Metres ) BLE1100/55
View larger image
This is the interconnecting tube which can be used to purge additional instruments or systems.
-
Dewpoint Sensor ( new ) BLE1100/155
View larger image
This is a replacement Dewpoint sensor, if the Dewpoint sensor in the NEPS1000 is malfunctioning.
-
Replacement Exchange Dewpoint Sensor BLE1100/56
View larger image
This is a replacement Dewpoint sensor if the Dewpoint sensor in the NEPS1000 requires Calibration.
-
Oil Vapour Filter BLE1100/58
View larger image
This can be used in conjunction with a continuous dryer, if oil vapour is present.
-
Exhaust Line with Flow Regulator BLE1100/70/02
View larger image
This allows the NEPS1000 to be used for purging small volumes by regulating the input flow and the exhaust.
-
Wall Mounting Gas Bottle Holder BLE1100/73
View larger image
This holds a gas bottle to a bench or wall.
-
Moisture Trap BLE1100/52
View larger image
This is an inline adsorber for use in conjunction with the NEPS1000 Dewpointstat function.
-
Dry Cab BLE1100/77
View larger image
This is a housing (approx 50-100 litres) used for drying out printed circuit boards and electronic assemblies using the NEPS1000.
-
Continuous Dryer BLE1100/57/01 or 02
View larger image
These are systems which can be connected to compressed air lines to provide continuous dry air to better than –70° C dewpoint. Voltages available: 230v 50-60Hz or 110v 50-60Hz.