Remote Sensor

The remote sensor option of the NEPS1000 Advantage allows the dewpoint sensor to be located in the system to be purged or in the case of through purging located at the outlet port or connection to monitor the progress of the purging process.

All NEPS1000 Advantage versions can be readily modified with a remote sensing adaptor kit which allows the dewpoint sensor to be located up to 3 metres from the NEPS1000 Advantage control unit.

The remote dewpoint function is operational in all three control modes. These are (off), (once) and dewpointstat control for the dry gas supply.

Effective use of the dewpointstat control function of the NEPS1000 Advantage can only be achieved when the remote sensor is directly mounted into the system enclosure or housing.

Remote sensing can also be used with the pumped NEPS1000 advantage and low voltage versions.